Spring is in the air … Can you hear the melody in his head again your password? Spring arrives with a lot of feelings and one of them is change, new look, new things. A new look can often be done simply by adding some cuts in our shirts, skirts, dresses or pieces Home decoration.

Some things to consider when working with ornaments:

• Look at what's in fashion (for example, ornaments lace)

• Cuts should be appropriate to the material

• Less is more

To begin we make some suggestions for cuts again aspect.

Auto-trim edges

• Looped Edge: Make strips over 1 ¼ inches wide. Times over and point about ¼ inch of edge. In turn in press. Cut pieces of equal size, put ends together to form loops and spray the garment or sewing project with a uniform spacing, using the same method remember that for edges.

• sharp edges: Cut strips along the 1 ¼ inches wide. Cut into squares and fold diagonally again and again. Suffice on the right side of the garment, the edges together, matching points. Suffice upward bias point all together, trim seam, turn on the wrong side bias, slip point position.

Links Blas

Bias can be applied with different designs and motifs. Bias strips folded lengthwise through the center can be bassoons for edges together. They are used as ornaments, and completely turned inwards and slip stitched to the position so that there are visible on the right side.

Lace Trimmings

• To gather lace, pull wires in the straight edge to the desired fullness, or whipstitch over the edge, pulling each thread to gather some points. Usually twice as fit as much as space that is to be applied is used.

• To perform an insertion lace, lace spray on the right side. Use a satin or running a junction. Cut the fabric underneath, and roll the edges raw hand, the capture of lace. Or, apply in zig-zag stitching, the machine zigzagged the hem. Overhanding, sewing or blanket. To put an insertion lace fabric lace, overcast stitch or zigzag.

• To turn corners, make a miter with small, very close, overcastting points so that the effect is like a thin rope. Cut off excess. Or, little pleat at the corners, the preservation of the curve.

Tassels

Wind yarn around cardboard to desired thickness and tie a piece separated at the top. Cut yarn at the bottom, out of cardboard, tie another chapter of about ½ inch around the top, leaving a long end to wrap tassel on several occasions. Threading a needle with this end, and inserting the needle into the center stand firm.

We have some good ideas to work with. Enjoy your new season with his new look trimmings.

About the Author:

Lenie Riegman is the author of www.homesewingprojects.com and www.smartwindowtreatment.com Visit these websites for more great home sewing projects and a full range of Finishing and Decorating trimmings as well as detailed application techniques.

Article Source: ArticlesBase.com – A New Look With Simple Trimmings

Christmas Tree Skirt – Sewing the Face Fabric and Trim